Explosion Prevention And Fire Extinguishing System For Transformers And Reactors
Digital Dwijaya represents and provides solution and services of CTR for Explosion Prevention And Fire Extinguishing System for Transformers and Reactors.
Typical Installation
On receipt of required activating signals, depressurizing commences within 13 ms by draining of a predetermined quantity of oil. Simultaneously Nitrogen is injected under pressure at a predetermined flow rate to create a stirring action thereby bringing the temperature of top oil surface below ignition point.
Additionally in case of external fire, it is extinguished within 30 seconds maximum. Nitrogen gas occupies the space created by oil drain and acts as an insulating layer between the top layer of oil in the transformer tank and oxygen in the atmosphere.
Transformer Conservator Isolation Valve (TCIV) blocks the passage of oil and isolates conservator oil thereby preventing conservator oil drain during operation and preventing escalation in the event of fire.
Features
- Reliable
- Dedicated system
- Saved over 15200 MVA of transformers from explosion worldwide
- System can be installed on existing transformers, reactors at site with minimal outage period
- System can be tested on energized transformers, unlike the other systems
- Multi signal activation, eliminates possibility of mal-operation
- Patented in over 80 countries
- Low investment compared to other systems
- Minimal post-fire and no secondary damage
- Low maintenance and running cost compared to other systems
- Full proof design to avoid ingress of nitrogen due to climatic changes into energized transformer
- Suitable for indoor, outdoor and unmanned substations
- Models available to protect OLTC and oil filled cable box
- Proven even to protect bushing explosion and fire
- Extinguishes external fire in bushing and/or radiator also
- Back up provision ensures nitrogen injection for fail safe operation
- Suitable for oil filled generator / furnace / rectifier / power transformers and reactors / Transformers for solar application
- Approved by leading transformer manufacturers and utilities worldwide
- Complies with NFPA
- CE ATEX certified



